SOHC.co.uk Forums > CB500/550
Is this a genuine clutch lifter push rod mod or what...
Trigger:
There are two different sizes of this rod and two part numbers. The larger diameter rod is for the K0 with 22850-292-020 and the K1 number is 11850-323-000. I am having the same problem.
Bryanj:
Trigger there are two different part numbers but they are the same diameter as the seal is the same, there was a modification kit to improve neutral selection and gear location, if you have the star wheel on the end of the selector drum with a big and a small roller yours has been modified which included the lated pushrod
Trigger:
Bryan, I thought the star wheel 24434-286-020 was upto 1018727 and 24439-323-000 was from 1018728. Have i got my information the wrong way round?
Trigger:
Cheers Oddjob, that's a bit clearer. Yes, i have the 2 roller system in place.
simonster:
Mine definitely has the roller wheel mechanism in place. Could an alternative to fashioning the domed end to fit the lifter plate be to have a ball bearing on this side?? Could this aid or cause any issues in the future? The rod may begin to flange around it but if it was heat treated on this side it could be an easier fix opposed to trial and error on getting the dome just right to match the lifter plate!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version