SOHC.co.uk Forums > CB350/400

Down pipes - swap for sprocket "plate" anyone?

(1/2) > >>

Clem2112:


I acquired the no. 1 and no. 3 (clamped into collector) pipes from another member some time back.
They were well used ones that had been re-chromed overseas.
The pipes seem quite solid but in places the chrome is not great ie. small areas have blistered.
Now I have found NOS ones, these oldies are looking for a home.
I also have the single skinned DSS copies if anyone wants a nearly new pair of these ?

I am after the pressed steel ring for the rear sprocket - if anyone has one and wants some downpipes
please let me know !

 

Lobo:
Clem... check your PMs. Might be an option?

Ash.. you could be the man to help here what with your skills & toolings.... these sprocket guards are impossible to find as riveted to the original sprocket... which then gets thrown lock, stock & barrel.  DSS do not stock them.... but (I guess) might be please to.

Cheers,
Simon

AshimotoK0:

--- Quote from: Lobo on September 25, 2014, 11:47:56 AM ---Clem... check your PMs. Might be an option?

Ash.. you could be the man to help here what with your skills & toolings.... these sprocket guards are impossible to find as riveted to the original sprocket... which then gets thrown lock, stock & barrel.  DSS do not stock them.... but (I guess) might be please to.

Cheers,
Simon

--- End quote ---

Sorry but that would need a press tool, not laser cut. Have you tried looking for a 250/360 G5 twin one? It may be the same.

Cheers ... Ash

bike-pusher:
(Small voice)

I've got one of those sprockets with the guard, in good order.....

Clem2112:
Aha.... I'll PM you mr bike-pusher....

Navigation

[0] Message Index

[#] Next page