SOHC.co.uk Forums > CB500/550

Carb overflow tube routing

(1/2) > >>

JustcallmeMrT:
1977 CB550F2. 

Hi all, I can't seem to find the length of tubing needed for each carb overflow tube, nor can I find where these are supposed to be routed to.  Can you help me out?

Johnwebley:
the four pipes a grouped together ,then over the rear mounting bolt ,in the center, and down between the swingarm and gearbox,
length is as long as it takes to be below the gearbox/sump .as long as they don't tangle in the stand.

Bitsa (Ralph Wright - RIP):
That sounds a ok same with all of the fours
Cheers
Bitsa

Trigger:
The tubes are slightly under half a meter long with a ID of 3.5, OD of 7.5 and run down the back of the engine.

Bitsa (Ralph Wright - RIP):
Qui crap yes been here too long
Trig more or less spot on told yer this guy is the biss
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page