SOHC.co.uk Forums > CB350/400
Winter Work
Trigger:
Bitsa, Not the type you use on the old CD's.
This type will require a chain rivet link tool.
Bitsa (Ralph Wright - RIP):
Yep got yer now its come back now.God do I hate memory blanks.
Cheers
Bitsa
bomber:
I would suggest to look online for another manual and cross reference what you do, it will save you time and trouble, don't ask how I know it.
Also, splitting the engine is easier than you might think.
Best of luck
K2-K6:
I like getting the motor steam cleaned (not pressure washed) before stripping as it makes sense to get any crap off it before starting, also if you loosen any awkward bolts after cleaning when it's still hot you can avoid some problems with old bolts that have been in there for a long time.
Bryanj:
You need to split the cases to make sure the tensioner horseshoe is ok and normally change the plunger springs. I have paerts book and manual on CD for cost of a beer plus postage
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version