SOHC.co.uk Forums > CB350/400
Winter Work
Trigger:
--- Quote from: hairygit on December 16, 2014, 05:45:20 PM ---They will be off, the "t" mark is for valve timing, the ignition timing marks are "f":))
--- End quote ---
hondatri does ask: I want to ensure valve timing is ok I have looked at Manual and not happy with it. So it is the T mark at 1.4
hondatri:
Thanks Trigger that makes more sense than the Haynes Manual. Next Job is to strip and Clean Carbs I see a 4 carb Kit on Ebay has anyone used one of these.
hondatri:
Hi its me againset up the valves ok On moving the bike stand I found what looks like a spacer Round 2.5" diawith a center hole of1.3" dia wit 2 holes kike for mounting, I cannot see anything similar in Parts Manual Is it off the 400/4
Lynx:
Oh dear. That's supposed to go under the cam sprocket bolts .
hondatri:
I thoght as much I dont mind stripping top to fit it I know honda fitted it for a reason But would it matter if I left it off I mounted Cam sprocket and used Locktite on Bolts. I dont see that bit on my Parts book.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version