SOHC.co.uk Forums > CB350/400
Winter Work
Trigger:
--- Quote from: Bitsa on December 21, 2014, 01:32:46 PM ---Trig
Apart from what you said is there any other differences for that year?
Cheers
Bitsa
--- End quote ---
In the engine ? No. The cam washer has never been on any microfiche for the 400 that i can find. Can't even find a part number for it but, if i have found one on a re-build i put it back.
hondatri:
I was getting my Exhaust ready for fitting and discovered that the Lip on tthe Engine end (Pushes on gasket) was missing found it on garage floor going to get a mate to mig weld it back on fingers crossed. Dont want to buy a pipe
hondatri:
I dealt with Dennis at noxandrattles who supplies Stainless Parts for 400/4 He told me he had stripped lots of 400/4 engines and never came across a washer on the camshaft, Today he contacted meto let me know he was doing the Topend of a 400/4 and lo and behold there was a a washer on the camshaft.
taysidedragon:
--- Quote from: hondatri on January 19, 2015, 08:01:44 PM --- I dealt with Dennis at noxandrattles who supplies Stainless Parts for 400/4 He told me he had stripped lots of 400/4 engines and never came across a washer on the camshaft, Today he contacted meto let me know he was doing the Topend of a 400/4 and lo and behold there was a a washer on the camshaft.
--- End quote ---
Could it be a spacer shim, so only there if needed?
mike the bike:
What do you mean by a washer on the cam? The two bolts that hold the gear onto the camshaft don't have washers, if they're there then somebody non-Japanese has put them there
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version