SOHC.co.uk Forums > CB350/400

Front fork problem

(1/4) > >>

Greg65:
I am replacing the seals on the front forks. The first one has come apart fine however ( there is always a however) the second is sulking. The bottom socket bolt, oil lock piece and under seat pipe are all rotating! So how do I hold the internal gubbins still while I undo the socket bolt. Thanks in advance for your wise words.

Greg

Bryanj:
Put the fork back together with spring and top nut the hold fork upside down and push down on slider to compress spring

Clem2112:
Second that... you need friction to hold the inner damper rod still.

steven400/4:
or use the speed of an air gun that worked on mine

matthewmosse:
Sharpen a broom handle like a pensil and bang it in with a hammer can work too.

Navigation

[0] Message Index

[#] Next page