SOHC.co.uk Forums > CB350/400

carburettor

(1/5) > >>

hondatri:
 I am hoping to strip and clean the Carbs on my 77 CB400/4F. I have a full kit of Jets and seals  and would like to know how I replace Needle. Do you count the needle rings from top or bottom

Bodd:
From the top.

[ Guests cannot view attachments ]

Bitsa (Ralph Wright - RIP):
The carbs on the 400 to me are tricky lots of washers etc take great notice how you strip them
Cheers
Bitsa

Norniron:

--- Quote from: Bitsa on December 27, 2014, 06:27:22 PM ---The carbs on the 400 to me are tricky lots of washers etc take great notice how you strip them
Cheers
Bitsa

--- End quote ---
Really,i didnt see alot of difference between the 400 and 550 except that the 550s are a bit bigger

Bitsa (Ralph Wright - RIP):
Your right there but try a set of 750s piece of cake and not fiddley like this setup http://www.sohc.co.uk/index.php/topic,5081.0.html
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page