SOHC.co.uk Forums > CB350/400
carburettor
Bodd:
Bend the tang arrowed to get them level when in the rested position and they should be around 21mm, if they are tilted as you describe the 21mm dimension is the point on the float furthest from the carb body/float bowl seating face.
[ Guests cannot view attachments ]
hondatri:
Thanks Bodd and all others who offered advice I now know what to do. All advice appreciated.
Bodd:
Another thing you need to get right is to make sure all the slides move/start at exactly the same time when the throttle is turned, also get the dimension in the picture below as near as possible when you put the carbs back on the bike, it's the best starting point for synchronisation, you can't get a vernier in so I made a 56mm gauge out of a nail.
[ Guests cannot view attachments ]
hondatri:
Thanks Bodd for that very informative info.
Navigation
[0] Message Index
[*] Previous page
Go to full version