SOHC.co.uk Forums > CB500/550
What do I check?
mike the bike:
Forgot to mention, make sure the tensioner is completely free (not sticking) and likewise for the pushrod otherwise you're wasting your time.
Trigger:
--- Quote from: mike the bike on January 26, 2015, 11:26:47 AM ---I was referring to the snobs of gasket goo interested sump; nothing to worry about. The particles of alloy are a different matter. It's more likely that the cam chain tensioner (the horseshoe part) is sticking causing the camchain to rub the sides of the camchain tunnel.
--- End quote ---
What horseshoe? There is no horseshoe on a 550.
Norniron:
--- Quote from: Trigger on January 26, 2015, 11:33:28 PM ---
--- Quote from: mike the bike on January 26, 2015, 11:26:47 AM ---I was referring to the snobs of gasket goo interested sump; nothing to worry about. The particles of alloy are a different matter. It's more likely that the cam chain tensioner (the horseshoe part) is sticking causing the camchain to rub the sides of the camchain tunnel.
--- End quote ---
What horseshoe? There is no horseshoe on a 550.
--- End quote ---
Stop it trig,of course there is
Trigger:
--- Quote from: Norniron on January 26, 2015, 11:36:07 PM ---
--- Quote from: Trigger on January 26, 2015, 11:33:28 PM ---
--- Quote from: mike the bike on January 26, 2015, 11:26:47 AM ---I was referring to the snobs of gasket goo interested sump; nothing to worry about. The particles of alloy are a different matter. It's more likely that the cam chain tensioner (the horseshoe part) is sticking causing the camchain to rub the sides of the camchain tunnel.
--- End quote ---
What horseshoe? There is no horseshoe on a 550.
--- End quote ---
Stop it trig,of course there is
--- End quote ---
On a 400 there is. It depends what you call a horseshoe ? On a 550 there is a blade and a tensioner
Trigger:
http://www.cmsnl.com/honda-cb400f2-england_model14647/partslist/E01.html#results
Number 50 is a houseshoe ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version