SOHC.co.uk Forums > CB350/400
White deposits in carbs from Ultra Sonic cleaner
Nurse Julie:
--- Quote from: AshimotoK0 on February 02, 2015, 12:14:23 PM ---Funny .. Five minutes ago I have just put a carb. body from a CB750, that I am giving to elBurro on here, into the US cleaner with some new additive I just got from Allendale electronics that is supposed to be suitable for carbs and non- ferrous in general. They are in there at 55°C with the solution (they recommend a 10% solution at 50 ->60 °C. It's a big industrial US cleaner and will give you an appraisal in a couple of hours. The carb body has the white oxide on the inside, as you describe Julie.
Ash
--- End quote ---
Let me know what they come out like please Ash
Nurse Julie:
--- Quote from: Bitsa on February 02, 2015, 12:09:42 PM ---Hi Julie
You are really going for it arent you? ;)Photos would help though of this crud
All the best
Ralph
--- End quote ---
Sorry Ralph, photo's not good as doing on my bobile. Will try again later. The deposits actually remind me of chalk, or Rennie indegestion tablets that's why I am assuming it is calcium.
Trigger:
What have you done Julie. May be a new set of carbs is needed ;D Just clean it off
Nurse Julie:
I haven't broken them and no one had died so it ain't a real disaster. Just not quite what I was expecting.
Bitsa (Ralph Wright - RIP):
Julie
Its coming back to me when I got mine done.It was not what I expected also they did not look as bugger all had been done to them and yes a powder deposit which have to say all came off with high pressure air gun.
Best of luck
Ralph
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version