SOHC.co.uk Forums > CB350/400

D/S repro exhaust

(1/2) > >>

Myford:
Hi All,
I'm just about to fit my new D/S exhaust and was wondering what clamps I need on the down pipe to collector box. The parts list shows 2 different clamps, but they were of course for the original (2 pipes welded) version. So which clamp do I order for all 4 pipes?
Thanks
Terry

boilermaker1:
Two clamps for the two down pipes and a larger clamp for exhaust header connection

Myford:
Thanks boilermaker, but I've answered my own question,- D/S do an after market clamp for the 1 and 3 pipe which is identical. so I think it will fit all 4 of the repro pipes.
I wonder why the original 1 and 4 clamps were different part numbers?
Terry

Drew400:
I guess you'll also have ordered the 'packing' that seals the joints (parts 18391-292-300 & 18391-375-000 on the Honda parts listing)... I forgot them, hence this message (sorry if it's a teaching you to suck eggs, comment).

Cheers, D.

Clem2112:
Haven't seen the latest DSS/Motad replica set up but I know the old BSM exhaust needed no seals as the headers are a close fit and the clamps are integral to the collector.
The clamps DSS sell are readily available elsewhere .... They are stainless steel and give a very strong clamping force.
Just be sure to position the No. 1 clamp so you can tighten it from underneath.

Navigation

[0] Message Index

[#] Next page