SOHC.co.uk Forums > CB350/400

Exhaust Silencer Bracket, do I need to buy one?

(1/2) > >>

Drew400:
Hi all,

I have yet to refit my original exhaust and DSS replica silencer back on the bike and have this quick question before attempting to...

DSS sell a silencer bracket (see: https://www.davidsilverspares.co.uk/graphics/parts/18353377610P_1_large.jpg). However, there wasn't one when I dismantled the bike and I can't find that part listed in my parts catalogue.

Naturally, I'm reluctant to buy a part (and pay the dreaded postage) if it's superfluous to my needs.

My 400 is a footrest on the swing arm type (if that's significant).

Thank you,

D.

tom400f:
How was your silencer held on then, Drew? The bracket on the bottom (which also holds the main stand rubber) has the captive nuts vertically orientated. That hanger bolts to holes in the frame and you'll need one.

tom400f:
Oh just read you have the swinging arm foot rests. Not sure. Picture of the frame may be?

martin_uk:
Depends on how good you are at fabrication.

Here is an original

2014_1214partstosell0024 by nitram2010, on Flickr

2014_1214partstosell0023 by nitram2010, on Flickr

Nurse Julie:
And this is what it looks like on the silencer showing the main stand rubber also

Navigation

[0] Message Index

[#] Next page