SOHC.co.uk Forums > CB500/550

Intake differences - which to use?

<< < (2/2)

JustcallmeMrT:

--- Quote from: hunterso on February 15, 2015, 05:42:05 PM ---The ports you use will depend on which type of carbs you have.

The PD46 carbs have their own sync ports so you will use the intakes without.
If you have the other carbs (without the sync ports) you will need the intakes with the ports.

Check your carbs - good luck - you seem to be storming on with your project  8)

--- End quote ---
Thanks for the info.  The intakes that came off my carbs have the synch ports, so I'll be using those.  What a learning curve this all is!

Norniron:

--- Quote from: JustcallmeMrT on February 16, 2015, 08:49:57 PM ---
--- Quote from: hunterso on February 15, 2015, 05:42:05 PM ---The ports you use will depend on which type of carbs you have.

The PD46 carbs have their own sync ports so you will use the intakes without.
If you have the other carbs (without the sync ports) you will need the intakes with the ports.

Check your carbs - good luck - you seem to be storming on with your project  8)

--- End quote ---
Thanks for the info.  The intakes that came off my carbs have the synch ports, so I'll be using those.  What a learning curve this all is!

--- End quote ---


Good choice T

Navigation

[0] Message Index

[*] Previous page