« previous next »
Pages: [1]   Go Down

Author Topic: Decal position  (Read 5039 times)

Offline Josse

  • Newbie
  • Posts: 9
    • View Profile
Decal position
« on: March 28, 2015, 02:55:18 PM »
Does anyone know the measurements for the position of the decals on a 1976 400/4 fuel tank.

Thanks in anticipation

Josse
Logged

Offline Nurse Julie

  • 1977 CB550/4 Mongrel Brat. 1974 UK 500/4 K1. Honda CD250u.
  • Grogu
  • *
  • Posts: 8718
    • View Profile
Re: Decal position
« Reply #1 on: March 28, 2015, 03:32:19 PM »
If you follow this link Josse, it gives all the measurements

http://www.sohc.co.uk/index.php?action=dlattach;topic=5207.0;attach=3904

Regards
Julie
Logged
LINK TO MY EBAY PAGE. As many of you know already, I give discount and do post at cost to forum members if you PM me direct.
https://www.ebay.co.uk/sch/julies9731/m.html?item=165142672569&rt=nc&_trksid=p2047675.m3561.l2562

LINK TO MY CB400/4 ENGINE STRIP / ASSESSMENT AND REBUILD...NOW COMPLETE
http://www.sohc.co.uk/index.php/topic,14049.msg112691/topicseen.html#new

Offline Drew400

  • SOHC Pro
  • Posts: 512
  • 400/4 I restored
    • View Profile
Re: Decal position
« Reply #2 on: March 29, 2015, 08:18:45 PM »
Hi Josse,

There's also the 'helmet safety' sticker on the top, centered between the fuel filler cap and the headstock end of the tank.

Cheers,

D.

Logged
Previous bikes:Puch Maxi 50, CD175, Suzuki T500, CX500, Z200, GS850, XS1100, GT750 (kettle), RD400, GTR1000 (not too many boastables in there!), CB750F2 Phil Read Replica

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: Decal position
« Reply #3 on: March 29, 2015, 08:47:55 PM »
Tip
Use masking tape to get everything in the correct positions before applying the decals.  It's far easier to adjust the masking tape than the decals.
Logged
Where's that 10mm socket got to?
Pages: [1]   Go Up
« previous next »