SOHC.co.uk Forums > CB500/550

My 76 550

<< < (5/5)

JamesH:
Unfortunately not Peter - got to have the correct length throttle cables I'm afraid..

K2-K6:
Check that you have enough slack in the "pull/opening" cable, if you don't then you get a conflict between the pull and push cables that can change as you turn the handlebars and also make the thottle heavy. As James says it's ideal to use the correct length cables but check the above first to see if you can gain an improvement.

Peter_plade:
I tried to reroute the cables that helped but I'm still not satisfied, so I ordered a set of correct cables. I think my clutch cable might also have a little problem with the lower bars.

Navigation

[0] Message Index

[*] Previous page