SOHC.co.uk Forums > CB350/400

400/4 Horn Switch

(1/4) > >>

Nurse Julie:
Hi Chaps
More advice please.
The horn switch on my 400 was very loose and sloppy, I had to keep wiggling it around and eventually the horn would sound. I thought it may be a loose connection so had a look inside . All the wires are attached  but there was a minute little screw missing that appeared to hold things together in there. I replaced the screw which made the horn switch, and everything else, tighter but the horn won't work again now. What am I doing wrong, any ideas?
Ta in advance
Julie

Trigger:

--- Quote from: Nurse Julie on February 24, 2015, 09:09:29 PM ---Hi Chaps
More advice please.
The horn switch on my 400 was very loose and sloppy, I had to keep wiggling it around and eventually the horn would sound. I thought it may be a loose connection so had a look inside . All the wires are attached  but there was a minute little screw missing that appeared to hold things together in there. I replaced the screw which made the horn switch, and everything else, tighter but the horn won't work again now. What am I doing wrong, any ideas?
Ta in advance
Julie

--- End quote ---

I bet you have lost or there is no spring  ;D

Nurse Julie:
Probably lost it Graham as I was very carefully taking it apart, using my trusty hammer of course  ::) ::) ::)

AshimotoK0:

--- Quote from: Nurse Julie on February 24, 2015, 09:32:38 PM ---Probably lost it Graham as I was very carefully taking it apart, using my trusty hammer of course  ::) ::) ::)

--- End quote ---

Probably got a spare spring.. can put it with bands once they are ready. I have also given away the tiny M2 nut and bolt to others on here as I used lots of them on a mechanism I make and buy them in 100's.

Ash

Lynx:
Hi Julie,

Have you got this excellent guide SohRon made?

http://forums.sohc4.net/index.php?PHPSESSID=op0qhav434uu50ep21pjsf2bi0&topic=80532.0

Navigation

[0] Message Index

[#] Next page