SOHC.co.uk Forums > CB350/400

Tank retaining rubber - anyone got a photo?

(1/2) > >>

Drew400:
Hi all,

I have a nice new rubber to fit on the frame at the seat end of the tank. You know the one; big bugger with a loop to fit the tank lip into.

Can I trouble someone to take a photo of how yours is fitted, please? I'm sure it should be straigtforward, but I don't want to force it, etc. I suspect that my frame lugs have been bent a little. Your photo will help.

Thank you,

D.

Mr-Gear:
Hello,

Here is a couple of pictures showing how mine was

Thanks, Ryan.

Chris400F:
Here's some more, from a different angle. The rubber is tight to get over the lug on the tank, probably even more so with a brand new one.

Chris

Nurse Julie:
Hi Drew. It's a bit of a pull and stretch to fit this rubber over the tank fitting, I know this as did it about 10 mins ago !!!. I think you and me are just about level pegging with getting the bikes back on the road. I  have to attend to a minor bit of wiring in headlamp today. White wire, going on to main bulb holder, has a loose conection on it and a bit of frayed wire which shorted and blew the fuse. Temporary fix with 13a house plug fuse to make sure that was the problem, which is was. So, tidy up wires, purchase new, proper non house plug fuses and headlamp back together...... hopefully.
Julie

Lobo:
Hi Drew,

Potential for scratching your tank here if levering the rubber over the tank tongue with something sharp. Read a tip elsewhere to use a couple of tie-wraps looped through the rubber ie used as pulling handles. Not tried it (yet) myself.... let us know if it is indeed worthwhile.

Simon

Navigation

[0] Message Index

[#] Next page