SOHC.co.uk Forums > CB750

My Us K6

(1/2) > >>

MeilakJ:
Hi Guys and Gals!,

Finally managed to get my freshly arrived Us bike !! After loads of Paper work (customs)!!

Obviously have to start fixing here and  there  until its all as I need it . will be keeping it as standard as possible with just a noisy 4 in to 1 in the future!!

First Item I noticed that I need taking care of are the clutch as it is not 100 % , Front Fork as it is not damping as it should and most important the start button is missing !!

Regarding clutch and front fork is this a home  job? I ve got loads of tools in the garage and I am good with hands on but the last Clutch I replaced was the one on My rd250 LC around 15 Years ago !! and I have never serviced a front fork before !Also Were is the best recommended place for the spares? and would also the plates need replacing ?

As for the starter button I have managed to source the button on a Us website but shipping was sky high !!Do you know of any other source in the EU?

Will update with pics as I need to resize them !

Cheers

Bryanj:
David Silver Spares or CMSNL for parts. What bike is it?

MeilakJ:
Its A CB750 K6 USA

Bryanj:
K6 start button is usually only available as a complete switch as it is complicated, if you fit a UK model type switch you can have the headlamp off, US has lights on all the time

MeilakJ:
I am aware of this but luckily the bike for some reason has a switch which is different , as it has the light switch incorporated with it . Might have  been changed at one time . I managed to find the switch from Yamiya will make a bigger order to get it with other stuff .

I also found the tread showing complete versions of the switches and how to work on them  which I will use to carry out repairs as it is very detailed and makes it look easy hopefully !!

Regards the clutch is there a special tool needed to dismatle ?

Navigation

[0] Message Index

[#] Next page