SOHC.co.uk Forums > CB750

Accelerator pump

<< < (4/4)

Bitsa (Ralph Wright - RIP):
If My memory recalls me right they were were a git from new never mind 30 plus on
Cheers
Bitsa

MarkCR750:

--- Quote from: martin_uk on March 23, 2015, 08:21:16 PM ---Mine  has a blocked jet on no.2

--- End quote ---
Mine was the same, I sprayed carb cleaner on it in situ by bending the aerosol applicator tube through 180 degrees and surprisingly it worked!, must have had congealed fuel at the outlet, yours could be blocked prior to that but worth a try.

martin_uk:

--- Quote from: MarkCR750 on March 24, 2015, 04:38:34 PM ---
--- Quote from: martin_uk on March 23, 2015, 08:21:16 PM ---Mine  has a blocked jet on no.2

--- End quote ---
Mine was the same, I sprayed carb cleaner on it in situ by bending the aerosol applicator tube through 180 degrees and surprisingly it worked!, must have had congealed fuel at the outlet, yours could be blocked prior to that but worth a try.

--- End quote ---

I have flow from bowl to other jets, but not out of no.2, just been trying with carb cleaner and air line.

May try a strand of copper wire from engine side.

Navigation

[0] Message Index

[*] Previous page