SOHC.co.uk Forums > CB750

Rebuild of my F1

<< < (2/3) > >>

NigelWilmshurst:
Hi Liam,
The tank I think is a one off, I can't find another tank like it anywhere on Google, it's made for the bike as it fits very well, what do you mean by fibreglass plug for the seat? a good tip for your rebuild is if your coating any aluminium parts always use an etch primer to allow the paint to key properly, i rebuilt this F1 about 20 years ago, all the coatings have lasted well except the aluminium, i didn't use an etch primer, blast clean, powder coat or 2k wet spray, no hammerite or aerosols in my workshop, send some pictures when your build gets going, i have some F1 spares if you need any.

JamesH:
Hi Nigel. I'm just down the road in Brighton. Don't suppose you have a spare F1 rear wheel hub that you'd part with?

NigelWilmshurst:
Hi Jamesh,
Unfortunately i don't, there is a jap bike importer in Brighton with a lot of bikes for sale at his shop, you probably know him already, he has a couple of complete F1's, he might have a spare back wheel, i will dig his number out if you need it.

JamesH:
Yeah I know Neil @ Triad - don't think he has spares but will drop in an see him. Good idea, thanks, James.

Liam:
I'm attempting to make a fibreglass seat…  So its Plug - carved solid from foam or timber - fibreglass the "plug" to make a mould and then make the seat…  we'll see how it goes.  ref alloy.  I've stripped it all alloy parts and polishing, got my work cut out!  Cheers for the advice.  I'm going to have to get a heater for the garage I think!

Navigation

[0] Message Index

[#] Next page

[*] Previous page