SOHC.co.uk Forums > CB750
earth cable
Graeme77:
This is my wiring so far.
I would have put pics up earlier but there is a size limit and ive only just worked out how to change size.
Lobo:
From that photo the rectifier loom plug does seem to have a green... confused.
Just found this pic for the K series... luckily my earth strap correct. Wouldn't have thought the F would be different.
Simon
Lobo:
I appreciate the following is not a lot of help.... I was looking through the F1 difference wrt your rectifier earthing... but it's says nothing... implying the set up is the same???
Anyways,
Lobo:
Still confused Graeme.
In your photo you've the fuse holder connector lowermost, and above it the rectifier connector. In the wiring diagram (my last post) these two connectors are reversed, ie the rectifier is lowermost. And it has a green wire.... (+ 3x Yellow + Red/White) which presumably is connecting into the bikes loom, and thence an earthing point somewhere?
At the mo can't think of what your spare 5" heavy duty cable might be, but by the eyelet sizes am wondering whether the PO connected the battery earth to a nearer point on the frame rather than the standard engine hanger bolt?
Simon
Lobo:
...just checked the DSS website... His reg / rectifier is a combined aftermarket part... same # for both 750 K & F series. Notably this part has the standard loom connector with included green earth wire.
So, I'm confused... and will have to bow out on this one!
Oh... that 5" strap??? its shape looks awfully like it connected the batt -ve to the forward most R battery cradle mount in your pic!
Simon.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version