SOHC.co.uk Forums > CB350/400
Hello, I have a 400 at last
tom400f:
Johndoc, you will get used to us 400F owners being very precise about everything. There's nothing wrong with this behaviour I must stress. Nothing wrong at all. ;)
Lobo:
Tom... meant to ask... is it 2.5 or 3.5 turns on the clutch adjuster.. it's just doing my head in. Oh, and the Parakeet... mine's 40 parts yellow to 3 parts cream.... should it be 41 parts yellow / 2 cream. And the decals... they're 1/2 cm too short.
Aaargh...
Nurse Julie:
--- Quote from: Johndoc on April 05, 2015, 08:51:28 PM ---Thanks Bitsa and Pday, yes it is possible that they are not sitting right, was going to take the carbs off anyway to check/set the float heights. Is this as straight forward as it seems?
--- End quote ---
Hi and welcome.
I have had the carbs off my 400 recently and fitted all new jets etc and had to re set float heights, it was simple enough to do with carbs standing 'end on'. As advised by this lovely lot on here, I checked the heights about 10 times before putting carbs back together. Started her up 2 days ago, 2nd push of the button. No leaks from bowls and only minor adjustments needed on mixture screws. I was well impressed with myself ;D ;D ;D ;D
Nurse Julie:
--- Quote from: tom400f on April 05, 2015, 09:06:31 PM ---Johndoc, you will get used to us 400F owners being very precise about everything. There's nothing wrong with this behaviour I must stress. Nothing wrong at all. ;)
--- End quote ---
Tom, as a trained Nurse I feel there is a lot wrong with this type of behaviour, but hey, as long as us 400 owner have fun, who cares ;D ;D ;D ;D
Trigger:
--- Quote from: Nurse Julie on April 05, 2015, 09:24:15 PM ---
--- Quote from: Johndoc on April 05, 2015, 08:51:28 PM ---Thanks Bitsa and Pday, yes it is possible that they are not sitting right, was going to take the carbs off anyway to check/set the float heights. Is this as straight forward as it seems?
--- End quote ---
Hi and welcome.
I have had the carbs off my 400 recently and fitted all new jets etc and had to re set float heights, it was simple enough to do with carbs standing 'end on'. As advised by this lovely lot on here, I checked the heights about 10 times before putting carbs back together. Started her up 2 days ago, 2nd push of the button. No leaks from bowls and only minor adjustments needed on mixture screws. I was well impressed with myself ;D ;D ;D ;D
--- End quote ---
Only 10 times ;D ;D ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version