SOHC.co.uk Forums > CB350/400

Spoked Up

(1/4) > >>

Lynx:
I've just finished building my front wheel with new stainless spokes and DS rim. I't's nicely trued but should I be aiming for a particular torque on the nipples?

taysidedragon:
There's a torque figure in the manual, can't remember what it is but it's a low figure - 4 or5 lb ft I think.

Lynx:
Thanks for the tip Taysidedragon. I've found it in the Honda manual now. 1.9 - 2.2 lbs-ft  :).

Trigger:

--- Quote from: Lynx on April 05, 2015, 07:31:07 PM ---Thanks for the tip Taysidedragon. I've found it in the Honda manual now. 1.9 - 2.2 lbs-ft  :).

--- End quote ---

Something wrong there, that is less than finger tight.

Lynx:
For metric it says 25-30 kg/cm.

Navigation

[0] Message Index

[#] Next page