SOHC.co.uk Forums > CB350/400

Front brake pipe thread

(1/2) > >>

Dan:
Can anyone please confirm what the thread is on the solid front brake pipe male connection - where the bottom hose connects to the solid pipe at the caliper.

I think it is M10x1 but would like confirmation before I order a custom hose.

Thanks in advance

Trigger:
It is m10x1 but, as long as no one has re-cut the thread  ;)

mike the bike:
I suggest using PTFE tape on the threads so it doesn't seize up.

Dan:
Thanks 👍

Bryanj:
BE CAREFULL ordering the hose as most of the Venhill fittings need a pipe nut with no thread at the end and a single flare not a double flare---Just specifying the correct thread does not always get you what you want. I can supply pics and pipe nuts if you wish

Navigation

[0] Message Index

[#] Next page