SOHC.co.uk Forums > CB500/550

How true is true?

(1/3) > >>

JustcallmeMrT:
According to my dial gauge I'm within 0.2mm of true left to right and up and down.  Good enough?  What is an acceptable tolerance?

Also, how tight should spokes be?

JamesH:
That's probably better than factory tolerances so I think you'll be fine...

csd4t:

Well within tolerance, MOT is +- 1.5mm if my memory serves me correctly.

Trigger:
That is true enough. Spokes is down to sound, a bit like tuning a piano. You need a good tune  ;D ;D

JustcallmeMrT:
I need a tuning fork!

Navigation

[0] Message Index

[#] Next page