SOHC.co.uk Forums > CB750
Alternator refurbishment
ginger_jim:
Hi all, the output loom for the stator and field coil needs to be refurbished as basically knackered. Everthing has gone brittle due to age and heat from the oil I guess. Any recommendations for refurbishing as I might as well get everything checked as part of the process?
Cheers
Trigger:
A member named Big Al makes the sub loom for the alternator. Had one off him last month. As long as the coil is not going to ground it should be OK.
jackdlad:
Theres a guy on the great ebay whos offering this service, MOTORCYCLE GENERATOR ALTERNATOR REWIND SERVICE punch that in or go to www.elliottmc.co.uk if its knackered twill cost around a 100 squid,it might not be in that case its a fiver for testing it,hope this helps.
ginger_jim:
Thanks Trigger, its the wires between the sub loom and the windings/coil that are the problem. Got it all sorted now by a local guy called Mr Williams in Teignmouth, Devon. He confirmed the tests I did, just needs some new wire (which is protected against heat and oil ingress)to the sub loom, which incidentally I got off Big Al - hes in Manchester right?
Mr Williams is charging £15 for his work - you cant be bad to that now can you :D
hairygit:
£15? Absolute bargain! The joys of living in the Westcountry with old fashioned ways and service ;D
Navigation
[0] Message Index
[#] Next page
Go to full version