SOHC.co.uk Forums > Project Board

CB750 F1 Project May 15

<< < (13/20) > >>

yozzer74:
Good way to get bearing out is to use a anchor bolt .have a look on utube .I did mine with one straight out no messing

yozzer74:
https://youtu.be/t7VQnNfqJtA

Coppertop1234:
Cheers - So thats an easier way for future ref.

Bryanj:
Usually just put a long bar in the centre that is smaller diameter than the spindle and tap it till the spacer moves sideways and then beat sheeite out of the centre race as you are changing the bearing onyroad

royhall:
He looks a bit dodgy in that vid. Bearing out, now I'm off to do some robbin. ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page