SOHC.co.uk Forums > Project Board

CB750 F1 Project May 15

<< < (15/20) > >>

Coppertop1234:
Before I start the next part, I thought i should ask for advice before doing it the hard way.

I am looking to change the head bearings as mine are about shot. The existing are original bearings and carriers.

I am thinking of replacing with tapered roller bearings, obviously take all old carriers and bearings out.
The question is:

Do I need any special tools to remove / replace the bearings?
Has anyone come across any problems/issues I should be aware of?

Just seen this on youtube and with the exception of metal on metal looks to have some good tips

https://www.youtube.com/watch?v=3H-G111JXbU

Bryanj:
The ones you take out will be binned anyway so just beat them out with a long drift and hammer but do it evenly all the way round

Spitfire:
These are the instructions that came with my bearings, easy enough as long as Bryan says you keep everything level.






Cheers

Dennis

yozzer74:
https://youtu.be/Da_ZenYu4Xo

Chris400F:
Love that final fitting instruction "double check all work".
Don't you always do that?

Navigation

[0] Message Index

[#] Next page

[*] Previous page