SOHC.co.uk Forums > CB350/400

CB400 brake lines.

<< < (3/3)

Chris400F:
I was happy with the Racetec items I bought.
I ordered black ones to look similar to the originals, they even came with the grommet on the lower hose to fit in the loop on the mudguard.
I was less happy with the Master Cylinder Repair Kit I bought from eBay which had a check valve measuring 15.5mm across the corners which
is never going to fit in a 14mm bore, but that's another story. Got one from DS in the end, more expensive but parts fitted correctly.
As long as the joint / brake light switch is in the same place on the bottom yoke on the 350 and 400 then I guess you should be OK.
Of course that could be famous last words ....

royhall:
Had a quick check a while ago, and the splitter block looks like the same part number for both 350 and 400, same with the lower steel pipe and the lower hose. Just the upper hose was different due to the 350's higher bars.

Navigation

[0] Message Index

[*] Previous page