SOHC.co.uk Forums > CB500/550

spring left over - carb rebuild

<< < (3/3)

matthewmosse:
Another of underside

dellenty1234:
Maybe the pictures are unclear, i have just taken a more detailed picture of how its currently situated.



James

dellenty1234:
Ken, i believe they are assembled the same as the photos Matt has supplied (thanks Matt)

And as for the spring, i'm not sure if i'm being totally blind but i can't see it for the life of me, I see the main spring situated on the left hand side of the throttle mechanism, but not the spring i have, the ID of the spring is about 17mm i would say.

hunterso:
Here's a couple of pics of my spare carbs - you can see the spring quite clearly







There is a good rebuild guide here - http://www.sohc4.net/cb550-faq/indexphp/pd46a-carb-rebuild-guide-by-brian-barnes

Hope that helps

D

dellenty1234:
Fantastic, I can see clearly where it goes and locates now! Good man!

Ken, yes your right, I made them that far apart purely so you could see when I took the photos, when the butterfly is in place you can't adjust the position of the of the rods without splitting the carbs back down.

Thanks for help and photos!

Navigation

[0] Message Index

[*] Previous page