SOHC.co.uk Forums > CB750

k7 Pilot air screw washers

(1/1)

ginger_jim:
Just stripped down my carbs to replace all the gaskets and seals.  Pulled the four Pilot air screw assemblies and only number 1 carb had the washer and seal present.  Does anyone know where I can get some of the washers?  I cant understand why a PO wouldn't have put them back in?  Size is outer 5mm inner 3mm and 0.5mm wide.

Cheers

Bryanj:
Never had any luck getting those, Honda only supply them with the jets. Are you sure they aint still down the hole?

ginger_jim:
Well....its bloody hard to tell!  Certainly couldn't see anything.  We used a depth gauge and our readings suggested that there was nothing in the recess. Oh well....the hunt is on for tiny washers!

ginger_jim:
Update - found same size washers on Ebay for a radio controlled racing car clutch washers!  Had to buy a bag of 10 so if anyone ever needs any let me know!

Cheers

Navigation

[0] Message Index