SOHC.co.uk Forums > CB750

Front Brake Callipers

<< < (2/2)

Coppertop1234:
Thanks for info all
Soaked the calliper in rust remover (B&Q) over night
Washed it clean and flushed with brake fluid several times
Eventually the piston started to move - Result
I think the key was the overnight soak, as the piston rust was minimal - not pitted or damaged in any way
Removed piston cleaned the surface with metal polish - (Autosol)
Seals were fine for now but will replace at later stage

Front calliper working fine ;D

The joy of the back calliper is still to come

Cheers

Keith Snr

Navigation

[0] Message Index

[*] Previous page