SOHC.co.uk Forums > CB750

K1 Fork Pistons

<< < (2/3) > >>

AshimotoK0:

--- Quote from: atlsec on May 30, 2015, 01:23:43 PM ---Hi Ash ,
            Thanks for the info , I was given a part No 51442 319 000  from DS but as it may turn out that I might not have K1 Forks but K3 .I am looking into this now . The sliders look the same but the stanchions are different .It is very difficult to identify parts from different years being fitted over the life of the bike .If it turns out mine are incorrect I will let you know .Thanks again , Alan .

--- End quote ---

319  .. That's a CB450 part, which according to CMS is superceded to the -300-part, so possibly the same.

Here is my Dropbox link with all of the parts and genuine shop manuals for K0-> K7/F2 . it's a  massive download 110 meg but well worth it, unless you are 'bikepusher' who said he preferred his Haynes manual before he left us  ;)

If they do turn out to be much later forks, I don't know what parts K7 forks have in them but I have a complete scrap pair in my shed (stanchions really pitted).

Ash

https://www.dropbox.com/s/anpzqn2r55f1o9k/CB750%20Mega%20Parts%20Service%20and%20More.pdf?dl=0

atlsec:
Thanks Ash for that info , it looks like they are K1 forks now I have found the pistons and all of the spring clips . Just hoping he can shift them without doing too much damage . Thanks , Alan .

JamesH:
Alan - are you talking about the damper rods that are secured to the fork lowers with a single allen bolt from the underside of the front axle ?

atlsec:
Hello James,
                   No its the piston that is fitted to the bottom of the stanchion ,Its come of the stanchion at some stage and hammered itself into the bottom of the slider and jammed there . Cheers ,Alan .

JamesH:
Got you - so you're talking about the compression and rebound damper valve parts..

Navigation

[0] Message Index

[#] Next page

[*] Previous page