SOHC.co.uk Forums > CB750

K7 Forks

(1/2) > >>

ginger_jim:
Hi all, on close inspection it looks like my fork legs are creased, so if my memory serves me well they cant be re-chromed and straightened?  New fork tubes seem unavailable worldwide.  Anyone got any good ideas as I seem to be up sh1t creek without a paddle! ;D

Bitsa (Ralph Wright - RIP):
I have a set of k7 forks complete but they are a bit shorter overall length than my k2 and k6.Can you measure yours top to bottom you never know might be of help
Cheers
Bitsa

ginger_jim:
Thanks Bitsa, will measure them as soon as I get back from work and post the length.

Cheers, Jamie

ginger_jim:
Hi Bitsa, overall length from the top nut bolt head to the 12'oclock point on the wheel spindle recess is ~756mm, or ~787mm from the top nut to the bottom of the wheel spindle clamp.

I'm pretty confused to be honest.  Got the bike going at the weekend and the engine sounds really nice but the bike had a definate pull to the right.  Yokes look straight to me and if there is a bend in the forks its even so slight.  Would a very slight bend in the fork equate to a pull to the right?  I guess the wheel wouldnt be running true?

Cheers, Jamie

Bitsa (Ralph Wright - RIP):
PMD YOU
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page