SOHC.co.uk Forums > CB750

Cb750 dual disk upgrade

<< < (6/14) > >>

El__burro:
i have read the salocal article (in my 1st post) many times but and i cant see where I've gone wrong.
calliper/disk/forks alignment is achieved with a few shims.
In my case i have used 8 (see picture in previous post)

thanks
el__burro

Waggles:
Can you post a pic taken a bit further away? Something doesn't look right in the top pic but I can't quite make out which way the front of the bike is. Could the fork slider be reversed or something?

El__burro:
Here are some more pictures.
I hope it helps you to help me.

Thanks
El__burro

Bitsa (Ralph Wright - RIP):
The top bkt don't look right to me and don't forget the mudguard bkt  has to to go up against the fork slider first which will take up more space so less spacers.If it were me by now it would be getting on my wick cant think of much more unless I am sitting in front of it sorry
Cheers
Bitsa

El__burro:
I've tried mounting the fender but it gets worse. (See picture)
I think the main issue is the fork touching the pivot arm.
probably others may have fitted a different caliper arm. (Top one in the picture)

Thanks
El__burro


   

Navigation

[0] Message Index

[#] Next page

[*] Previous page