SOHC.co.uk Forums > CB750

Cb750 dual disk upgrade

<< < (8/14) > >>

Bryanj:
The "mirror image" caliper bracket was originaly a magnesium casting for Honda Racing which was supplied in a kit along with carbs and lots of other goodies.

You can use a standard bracket by maching off the "Lump" that goes against the normal slidetr and using spacer(s) to get the bracket to bolt on the opposite slider in the correct alignment.  If you dont want to do this you need a pair of later forks that can use the bracket you pictured

El__burro:
that picture is so porn.

El__burro:


--- Quote from: Bryanj on June 27, 2015, 07:38:29 PM ---
You can use a standard bracket by maching off the "Lump" that goes against the normal slider.

--- End quote ---

i thought about this option but not sure if it weakens the arm somehow.
ive been looking online but no success.
what is a decent gap?

starting to see the way out of this.

thanks
el__burro

Bryanj:
Machining and spacers is the way that 98% of the early twin brake conversions were done as nobody could afford the Honda Kit!!!

El__burro:
i guess thats my same route.
just studying on a spare one ive got.
probably shaving up to the 4th shim could do.
thanks


el__burro

Navigation

[0] Message Index

[#] Next page

[*] Previous page