SOHC.co.uk Forums > CB750

Chrome Fork Retaining Bolts

(1/2) > >>

Coppertop1234:
identification problem - Project 2 Forks

Keith Jnr purchased  set of F1 forks from e bay which had one of the bolts with fit into top yoke missing
Ordered replacements from DSS when they arrived they were different to what 1 needed

The chrome bolt at the top of the forks on the set which were sold as F1 screw into the station but also have thread which retains the compression spring.

The set from DSS only have an hole on the inside of the bolt No Thread

DSS checked all K Series and F Series for the part I need but no joy

It sounds like I was sold forks off some other Honda - any clues which model?
The tops of the forks legs have previously had a shroud fitted to hold the headlamp like K Series

Could be easier to source another set of front forks/

Anyone got a half decent set of F1 forks they wi to part with or swap for some F2 forks

Cheers

Keith Snr

Bryanj:
The only ones i know of that have the long retaining rod is the early 500 four and maybe the 450 twin

martin_uk:
My F1's do not have threads on fork caps apart from outer part to screw into stanchion.

http://www.cmsnl.com/honda-cb750f1-super-sport-1976-england_model14680/partslist/F07.html#results

Waggles:
+1 to Martin

Bryanj:
Qustin,

Do you have a threaded bar to screw into the top nut?

If not it don't matter either will do

If yes they are completely the wrong forks

Navigation

[0] Message Index

[#] Next page