SOHC.co.uk Forums > CB750
CR750 first ride
gamma:
Hi James and Mark, I had already made this,
A new battery tray with reg/rec and fuse box etc:, but nice idea about tank.
James I am sending a couple of photos soon of my spare F1 frame I just took in Saudi, can you compare as best as you can with your K2 and send me some pics. I shall also send pics of tank that didnt fit.
gamma:
[URL=http://s192.photobucket.com/user/galaxy8155/media/IMG_57421.jpg.html]
MarkCR750:
Looks pretty much the same as my K7 frame did Gamma, I doubt there is much difference between the two.
gamma:
I agree Mark, here are the photos of the tank i bought and then returned. The tunnel was too narrow to go over the outer frame rails, and the cut-out underneath did not match the frame triagular supports. I also realised that the front of the tank was not going to allow clip-ons.
sorry about size of photos
MarkCR750:
I wouldn't be surprised if your previous tank had been made for a CB550, and not very well by he look of things :), you're in for a nice surprise if you haven't seen Asa Moyes work before (Bartel Engineering), the guy is a genius (see below,photo not taken from the best angle but obviously a quality product).
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version