SOHC.co.uk Forums > CB350/400

Seat pan

(1/4) > >>

Greg65:
As my seat has a split I have stripped it down and to treat the rust, however I have found a couple of cracks. Do you you guys just weld them up or should I add some reinforcing strips across them?

While I'm here I've been looking at some Carb Refurb kits. Starting with DSS at £20 each or on eBay a kit of 4 for just under £30 from Japan. Is price just the difference?

Also on eBay an exhaust, original headers and collector if your interested. http://www.ebay.co.uk/itm/Honda-CB400-Four-genuine-OE-exhaust-system/391215284022?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29975%26meid%3D713b278e83764ac79d58c3bc5325ed69%26pid%3D100009%26rk%3D4%26rkt%3D10%26sd%3D252042377563

AshimotoK0:
Exhaust from our once member bikepusher. Probably another nice bike met it's maker to yield it  :(

royhall:
I don't think you like Bike-Pusher Ash. :-\

paul G:
Not many people do.
I got my carb refurb kits from the states, still cheaper than silvers even with the import duty.

Regards,

Trigger:

--- Quote from: Greg65 on August 07, 2015, 07:47:36 AM ---As my seat has a split I have stripped it down and to treat the rust, however I have found a couple of cracks. Do you you guys just weld them up or should I add some reinforcing strips across them?

While I'm here I've been looking at some Carb Refurb kits. Starting with DSS at £20 each or on eBay a kit of 4 for just under £30 from Japan. Is price just the difference?

Also on eBay an exhaust, original headers and collector if your interested. http://www.ebay.co.uk/itm/Honda-CB400-Four-genuine-OE-exhaust-system/391215284022?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29975%26meid%3D713b278e83764ac79d58c3bc5325ed69%26pid%3D100009%26rk%3D4%26rkt%3D10%26sd%3D252042377563

--- End quote ---

The best way to go with a metal seat pan is, blast all the paint off it and have a real good look at what you have. If you just weld up any splits, it will split again. Re-in force it from the inside and powder coat.
The carb fits from Japan are spot on.

Navigation

[0] Message Index

[#] Next page