SOHC.co.uk Forums > CB350/400

Wiring sizes

<< < (3/3)

Saisei:
Use thin wall for bikes, thick wall is too inflexible.

BigAl (Alan):
I always use 'thin wall' its much more flexable

royhall:
I agree thinwall is the way to go, but don't forget its for the rear of a 350F that runs unprotected through the underside of the back mudguard. Normal walled cable is a bit more resistant to damage from road debris etc, and it is not required to flex in that location. Wouldn't want to do a full harness with it though as it's way too thick.

Navigation

[0] Message Index

[*] Previous page