SOHC.co.uk Forums > CB350/400

Brake fitting threads

(1/2) > >>

gtmdriver:
Can anybody tell me whether the male bake unions on the steel line connecting the lower flexible hose to the front brake caliper are the usual M10 x 1mm please?

Bryanj:
NO, they are the same as Honda cars BUT you may need the ones with no thread at the tip depending on the make/type of flexible and you have to machine those yourself as they aint used anywhere else

gtmdriver:
So what thread are they if they're not M10 x 1?

mike the bike:
I think it's M10 x 1

Dan:
I ran a braided hose from the m/c to the solid brake line that's connected to the front calliper. It's M10x1.25. If you need any advice try Hel Performance, they were able to answer all my questions and I had a hose delivered the next day.

Navigation

[0] Message Index

[#] Next page