SOHC.co.uk Forums > CB750
CB750K Alloy rims
philward:
Thanks Pete - sorry for delay in replying, have been been doing up my recently deceased mums house and not concentrating on the bikes. I'm back on it now! I have messaged them previously with no reply and they are not listing them - have bought 2.50 x 18 from them. Have managed to get a really good SH 2.15 x 18 Akront of ebay.
So next question is spoke sizes as I'm building wheels myself (as I want to do all the work myself as I do with all my bikes - except final standard finish paint on tank, etc) - I need spoke sizes for front and rear 18 inch rims/standard hubs. The SS spokes are available on German ebay at about £40ish posted (Which is loads cheaper than Uk suppliers) . I just need sizes or visible measurements so I can add through the rim length to be able to order sets.
I know I have asked before but if nobody has any info, I can maybe try the American site? I know that Central Wheel and Hagon, etc do them but cost is prohibitive when buying and cost of lacing - I like doing it myself if poss - and I'm tight!
Any help much appreciated
Phil
MarkCR750:
Phil I have 18 inch alloys on mine, if I measure from the centre of the hole on the hub to the top of the nipple would that be of any help?
philward:
Sorry for delay again - in the garage messing with bikes (to get away from Big Brother crap!) - that would be great thanks Mark
Trigger:
--- Quote from: philward on February 03, 2016, 07:32:11 PM ---Thanks Pete - sorry for delay in replying, have been been doing up my recently deceased mums house and not concentrating on the bikes. I'm back on it now! I have messaged them previously with no reply and they are not listing them - have bought 2.50 x 18 from them. Have managed to get a really good SH 2.15 x 18 Akront of ebay.
So next question is spoke sizes as I'm building wheels myself (as I want to do all the work myself as I do with all my bikes - except final standard finish paint on tank, etc) - I need spoke sizes for front and rear 18 inch rims/standard hubs. The SS spokes are available on German ebay at about £40ish posted (Which is loads cheaper than Uk suppliers) . I just need sizes or visible measurements so I can add through the rim length to be able to order sets.
I know I have asked before but if nobody has any info, I can maybe try the American site? I know that Central Wheel and Hagon, etc do them but cost is prohibitive when buying and cost of lacing - I like doing it myself if poss - and I'm tight!
Any help much appreciated
Phil
--- End quote ---
phil, SS spokes at £40 seem too cheap mate! Do you have a link ?
philward:
Here you go Graham - see what you think! Value your opinion
http://www.ebay.co.uk/itm/301657350547?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Phil
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version