SOHC.co.uk Forums > CB350/400
Oversize Pistons 0.50mm
Bodd:
--- Quote from: AshimotoK0 on October 13, 2015, 07:24:41 PM ---I reckon they may only offer the big bore kit, as lots of variants to consider as the 400 in japan was just under 400cc and Europe & USA was 408cc.
Ash
--- End quote ---
So what size would these standard rings be ?
Bryanj:
Who knows you would need to ask what bore they are for
Bodd:
I'm thinking they are exactly the same.
"To comply with licence restrictions in France and Japan Honda also produced a 398 cc (24.3 cu in) version by fitting a shorter 48.8 mm (1.92 in) stroke crankshaft."
stevush:
So what size would these standard rings be ?
Good question... I'd assume that they're to fit a standard 51mm piston.
I need 51.5 mm pistons and rings, however I do have another option..
I could ask SEP to make and fit new liners, then rebore to std size, then re-use my std Honda pistons with new rings.
Swings and roundabouts really, save on new pistons but pay for new liners ?
Steve
Bodd:
As it states the stroke is altered the bore will be the same. This guy is worth keeping an eye on as he sometimes has piston kits, he has the 0.5 rings at the moment but not the pistons, I got a set off him for an FZR Yamaha a while back and they were fine.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version