SOHC.co.uk Forums > CB750
Clutch ???
Chris400F:
--- Quote from: Coppertop1234 on September 29, 2015, 07:48:11 PM ---... unsure where i will source one of these at moment can't see anything on DSS site
--- End quote ---
If you have a Parts List try searching for the part on DS by number.
I have known parts where the part is common to multiple models and isn't listed on the model page but comes up when you search by number.
If it still doesn't show then Google the P/N.
Coppertop1234:
I would think it will be the clutch lifter plate bearing that has collapsed
New springs and bearing on order
Coppertop1234:
Split clutch today after ordering new parts inc heavy duty springs, so I could rebuild,only to find the clutch was not the issue.
It was the last person who worked on the clutch 25 years ago,obviously they didn't have a torque wrench as the bearing carrier had drifted loose.
No wonder it sounded like a can of marbles.
The retaining nut was loose and not locked with the lock tab
Well while i was in I replaced the bearing and seals,checked friction pads,which were fine
Torqued retaining bolt to 34lb and locked with tab
Replaced damaged bolts & torqued to 9lb
Rebuilt and all is as should be
Glad the bolts drifted out while pottering about at home and not on a run to coast
Navigation
[0] Message Index
[*] Previous page
Go to full version