SOHC.co.uk Forums > Project Board

Arizona 350

(1/2) > >>

Bullit:
Iv done a bit of work to the old girl and thought I'd post up a rebuild thread.
I'm not looking to build a show winner but a tidy bike I can use on a sunny afternoon. I will be doing as much as I can myself, not looking forward to all the polishing that's gona need doing.

Thankfully coming from the dessert there's not really any rust just lots of dirt and dust

So here's a pic of how far Iv got

royhall:
Looking pretty good Bullit. Is that the original paint after a wash down?

Bullit:
Not entirely Roy. When I cleaned it all down the paint was good but very faded and sun bleached so was very dull. All Iv done is flat it back and given it 2 coats of hammerits smooth aerosol.
The only problem is that it takes ages to dry properly so when weather has permitted over the last week or so it's been sat outside in the sun to try and put some heat in to it.

Those rear shocks have only been wiped down, not polished them yet as need new upper bushes.

Bullit:
Not had chance to update this recently as I'd been busy sorting out my little bike for the last race of the season.
So hear is what Iv been upto. I have cleaned, polished, painted and replaced where necessary all parts of the rear wheel and brake.
Can't decided whether I prefer it with or without the sprocket guard

Bullit:
Front forks cleaned up and now fitted. They do have some pitting but will readdress these after it's been tested.


Does anybody recognise these pipes? Iv not seen the same on any pics Iv come across. Unsure whether the end cones have been added on?

Navigation

[0] Message Index

[#] Next page