Centre Stand cushion

[Athame57]

I noticed my centre stand when up is in contact with my exhaust and I'm not sure that should be the case as nowhere can I see a rubber cushion I'll swear exists to stop that ....?

[taysidedragon]

There should be a rubber pad that fits into a hole in the silencer near the mounting plate.
They are available.

[Deano400]

https://www.davidsilverspares.co.uk/parts/by-part-number/partnumber_9501161000/

Think this is it. £1.38

[Athame57]

Thanks for that! 

[Athame57]

Cushion arrived in the post today and i went straight downstairs to fit it, alas no joy. I fitted the rubber T stud on the back of the cushion into the groove on the silencer that also holds the bolt that secures the silencer to a brace between it and the frame. As I really expected the stand simply kicked it straight off again. The grooves on the cushion face side on too, I doubt they are meant to do that, face on would be more like it. Is there supposed to be a seperate brack to carry this cushion that I'm missing?

[Nurse Julie]

Photos from underneath George.....including dirt (still 

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[Athame57]

Thanks for the images Julie that explains it, my silencer does not have the same fittings. I'm going to have to invent something.

[Nurse Julie]

Thanks for the images Julie that explains it, my silencer does not have the same fittings. I'm going to have to invent something.

That would explain it George. This is a Brituro silencer, which have the same fittings as the OEM silencer.

[blackeagles]

a rubber door stop maybe?

i have a motad silencer with a bracket from something else so the stand was hitting the bracket and i fitted a door stop.  it may not look great but it works!