SOHC.co.uk Forums > CB500/550
CB500/4 carburetors
jj205mi:
I'm willing to try anything lads, the bowls are really bad I've stripped a few carbs over the years (motorcycle tech at a Honda/Suzuki dealer for 10years) now working at an a tv service centre. But these ones have stuck the float bowl pins to the float hinge, the needles are stuck in the guides, I told the owner easiest way would be find a better set but as I said I'll try it. Just not my money I'm spending, so that's the issue.
Chris400F:
You could always drop the guy on eBay an email, with a photo or two, to see what he thinks.
Reading the listing again I see I got it wrong - price doesn't include parts, only fitting of supplied repair kit,
but these are not too expensive from Cruzinimage.
JamesH:
If you can, post up some pics on here so we can advise you properly.
Spitfire:
I left my F1 in the garage for 10 years while I was working overseas, when I came back I wondered why I could not operate the throttle, when I took them off it soon became clear what the problem was, the needles were stuck in the gum, not nice stuff but they cleaned up well.
Cheers
Dennis
hondaking:
Try having them sonic cleaned I do quite a few for people and they come up real well
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version