SOHC.co.uk Forums > CB350/400

To beep or not to beep

(1/6) > >>

Woodside:
Right
No luck on desperately seeking a horn...."now now nothing mucky here!"
So thought I'd pop the little fecker to bits ....nope?
Does any one know how the plastic cover is supposed to be removed it looks like it should spin off but it's on pretty firm....and I do t want to wreck it at first instant ....sounds lame but it would be nice to know as I'm sure it can be sorted somehow
Thanks in advance

Also to broaden the search were these fitted to any other model....surely they must have

AshimotoK0:
Snaps off but may need softening a bit with hot air. removed two last week

I was going to disect one myself sometime, by de-crimping the outside. Need to put a big Jubilee clamp or better round the outside (like crimp rings on metal Honda gauges)

Cheers  .. ash

Chris400F:

--- Quote from: Woodside on November 02, 2015, 07:26:14 PM ---Also to broaden the search were these fitted to any other model....surely they must have

--- End quote ---
P/N from Parts List is 38100-369-004 for UK and some other countries.
Looks like this part was also fitted to the CB250/360 G5 models (CB360/360T in US), also CL360 and CL360K1.

Woodside:
 Cheers
Just figured out the cl/cb360 models had them fitted and what looks like the same mounting bracket too.
There's a few in U.S. But all say not working for parts...
I shall warm it up tomorrow and try to pop cover off and see what's occurring ...you never know...

Unless hondaking steps in and flogs me his??? ;)

AshimotoK0:
Pretty sure they can be fixed, its the de-crimp and recrimp that's tricky.

Yes pretty sure CB250/350 G5 unit is the same.

Navigation

[0] Message Index

[#] Next page