SOHC.co.uk Forums > CB750

Tyre thread for MOT cb750 k2

(1/2) > >>

El__burro:
Hello, having almost sorted the rest of the bike I am preparing for my first MOT attempt.
I have been reading a lot of very confusing posts online but probably I can get a more straight forward answer here.

How can I work out if my tyres are MOT fail or pass?

Also what tyres would you advise (for regular daily use).

Regards
el__burro

Chris400F:
Obvious things to check are things like tread depth, correct fitment, damage to tread or sidewalls (cracks, bulges, splits,...).
This is the relevant page in the MoT Testers Manual, quickly found via Google.
http://www.motuk.co.uk/mcmanual_410.htm

As far as which tyres there are various threads on here with people extolling the virtues of and/or expressing a preference for various makes and models (types?) of tyres.
There are no right answers. Maybe browse a few of the threads and see what others use to get an idea.

El__burro:
Thanks,
it looks like I need to replace the rear tyre at least.
Should all 4.00-18 with a H as speed index be fine?

Thanks
el__burro

Chris400F:
Sort of.
If you go for one of the newer tyres with metric sizing you will find the equivalent size will be 110/90-18 or maybe 120/90-18.
These tyres may come with a higher speed rating, I think Avon RoadRiders are V rated.
Check out the manufacturer's web sites - certainly Avon will tell you what tyres / sizes are suitable for your bike.

pablo:
Also check the valves are not perished or cracked. A common oversight it's not always the tyre that causes a fail.

Navigation

[0] Message Index

[#] Next page